PTE’s PT91.5 Turbocharger features the following:
• 91.5mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7″ radiused inlet
• F or G trim turbine wheel
• Turbine housing options:
– G trim available with T5 Tangential 1.0, 1.32, or 1.50 A/R.
(All housings feature a 5″ OD (outer diameter) V-band discharge)
• Hydrodynamic 360° thrust bearing system

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT8891 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 88mm inducer compressor wheel
• Pro Mod compressor cover
• Exclusive CEA® (Competition Engineered Aerodynamics) 91mm turbine wheel
• Turbine housing options:
– T5 Tangential .96 or 1.08 A/R with 5″ OD (outer diameter) V-Band discharge
• Available with either a Hydrodynamic 360° thrust bearing system, or an air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT8891 GEN2 CEA® Turbocharger features the following:
• Exclusive GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 88mm inducer compressor wheel
• Pro Mod compressor cover
• Exclusive CEA® (Competition Engineered Aerodynamics) 91mm turbine wheel
• Turbine housing options:
– T5 Tangential .96 or 1.08 A/R with 5″ OD (outer diameter) V-Band discharge
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

With a dedicated commitment to innovation, PTE’s revolutionary GEN2 Pro Mod turbochargers were designed with the hardcore enthusiast in mind. Purpose-built for improved strength, durability and longevity, the center housing and compressor backplate assembly is an innovative one-piece design, manufactured from an aluminum forging. Additionally, these units come equipped with stainless steel turbine housings complete with an extended turbine discharge with cross-bolt provisions for added safety.

Safety was also a key consideration when developing the new designs, and all of Precision’s GEN2 Pro Mod turbos are SFI-approved when used with our stainless steel V-band inlet/outlet housing.

PTE’s GEN2 Pro Mod 88 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 88mm inducer compressor wheel
• Exclusive CEA® (Competition Engineered Aerodynamics) 103mm turbine wheel
• Turbine housing options:
– T5 1.00, 1.12, 1.24, or 1.40 A/R
– Stainless steel V-band inlet 1.15 A/R
* NOTE: Additional cost may apply for certain housings.
• Extended turbine housing discharge with cross-bolt provisions
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• One-piece CHRA and compressor backplate assembly to improve durability
• SFI-approved on specific models

Unlike anything else on the market today, Precision’s GEN2 Pro Mod turbochargers are set to be a serious game-changer in the world of turbo technology. Precision customers are already setting records with these GEN2 Pro Mod turbos: Jose “El General” Gonzalez has set both the ET and MPH records and Don Walsh, Jr. still holds 1/4 mile MPH record. You could be next!

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT94 Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 94mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7” radiused inlet
• F or G trim turbine wheel
• Turbine housing options:
– G trim available with T5 Tangential 1.0, 1.32, or 1.50 A/R
(All housings feature a 5″ OD (outer diameter) V-band discharge)
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

With a dedicated commitment to innovation, PTE’s revolutionary GEN2 Pro Mod turbochargers were designed with the hardcore enthusiast in mind. Purpose-built for improved strength, durability and longevity, the center housing and compressor backplate assembly is an innovative one-piece design, manufactured from an aluminum forging. Additionally, these units come equipped with stainless steel turbine housings complete with an extended turbine discharge with cross-bolt provisions for added safety.

Safety was also a key consideration when developing the new designs, and all of Precision’s GEN2 Pro Mod turbos are SFI-approved when used with our stainless steel V-band inlet/outlet housing.

PTE’s GEN2 Pro Mod 91 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 91mm inducer compressor wheel
• Exclusive CEA® (Competition Engineered Aerodynamics) 103mm turbine wheel
• Turbine housing options:
– T5 1.00, 1.12, 1.24, or 1.40 A/R
– Stainless steel V-band inlet 1.15 A/R
* NOTE: Additional cost may apply for certain housings.
• Extended turbine housing discharge with cross-bolt provisions
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• One-piece CHRA and compressor backplate assembly to improve durability
• SFI-approved on specific models

Unlike anything else on the market today, Precision’s GEN2 Pro Mod turbochargers are set to be a serious game-changer in the world of turbo technology. Precision customers are already setting records with these GEN2 Pro Mod turbos: Jose “El General” Gonzalez has set both the ET and MPH records and Don Walsh, Jr. still holds 1/4 mile MPH record. You could be next!

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PRECISION TURBO AND ENGINE has added a new size to its line of championship winning and record-setting Pro Mod turbochargers with the release of the new GEN2 Pro Mod 88 XPR Turbocharger. 

Utilising an 88mm inducer GEN2 CEA® (Competition Engineered Aerodynamics) CNC-machined, 2618-forged aluminum compressor and our 108mm exducer CEA® turbine wheel, this Pro Mod offers unparalleled performance, greater efficiency ideal for higher pressure ratios, and an 8-12% increase in power over the standard GEN2 Pro Mod 88 turbocharger. 

Purpose-built for improved strength, durability and longevity, every new GEN2 Pro Mod 88 XPR CEA® turbocharger will be equipped with an air-cooled, dual ceramic ball bearing Center Housing Rotating Assembly (CHRA) for faster transient response, less turbo lag, and added thrust capacity. 

In our continued efforts to bring the most technologically advanced and safest turbochargers to market, a compressor cover ballistic blanket will come standard with this product. Additionally, this turbocharger will also come equipped with a speed sensor provision within the compressor cover, as well as the speed sensor to monitor turbo shaft speed. 

The GEN2 Pro Mod 88 XPR is available with both T5 and V-band inlet options to provide greater flexibility for turbo kit fabrication. Your choice of turbine housing options include: T5 1.0 A/R, T5 1.12 A/R, T5 1.24 A/R, T5 1.40 A/R, and V-Band Inlet/V-Band Outlet 1.15 A/R. 

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s GEN2 Pro Mod 94 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 94mm inducer compressor wheel
• Exclusive CEA® (Competition Engineered Aerodynamics) 103mm turbine wheel
• Turbine housing options:
– T5 1.00, 1.12, 1.24, or 1.40 A/R
– Stainless steel V-band inlet 1.15 A/R
* NOTE: Additional cost may apply for certain housings.
• Extended turbine housing discharge with cross-bolt provisions
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• One-piece CHRA and compressor backplate assembly to improve durability
• SFI-approved on specific models

Unlike anything else on the market today, Precision’s GEN2 Pro Mod turbochargers are set to be a serious game-changer in the world of turbo technology. Precision customers are already setting records with these GEN2 Pro Mod turbos: Jose “El General” Gonzalez has set both the ET and MPH records and Don Walsh, Jr. still holds 1/4 mile MPH record. You could be next!

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT98 Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 98mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7″ radiused inlet
• F or G trim turbine wheel
• Turbine housing options:
– G trim available with T5 Tangential 1.0, 1.32, or 1.50 A/R
(All housings feature a 5″ OD (outer diameter) V-band discharge)
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s GEN2 Pro Mod 98 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 98mm inducer compressor wheel
• Exclusive CEA® (Competition Engineered Aerodynamics) 103mm turbine wheel
• Turbine housing options:
– T5 1.00, 1.12, 1.24, or 1.40 A/R
– Stainless steel V-band inlet 1.15 A/R
* NOTE: Additional cost may apply for certain housings.
• Extended turbine housing discharge with cross-bolt provisions
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• One-piece CHRA and compressor backplate assembly to improve durability
• SFI-approved on specific models

Unlike anything else on the market today, Precision’s GEN2 Pro Mod turbochargers are set to be a serious game-changer in the world of turbo technology. Precision customers are already setting records with these GEN2 Pro Mod turbos: Jose “El General” Gonzalez has set both the ET and MPH records and Don Walsh, Jr. still holds 1/4 mile MPH record. You could be next!

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.