Menu

Precision Turbochargers are the best on the market and are available exclusively in Australia from Gas Racing. Our Sydney workshop holds a range of popular turbos, which we can install and tune for your 2JZ, rotary, Nissan RB or other high performance applications.

PTE’s GEN2 Pro Mod 102 CEA® Turbocharger features the following:
• Exclusive GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 102mm inducer compressor wheel
• Exclusive CEA® (Competition Engineered Aerodynamics) 105mm exducer turbine wheel
• Turbine housing options:
– T5 1.40 A/R
– Stainless steel V-band inlet/outlet
 * NOTE: Additional cost may apply for certain housings.
• Extended turbine housing discharge with cross-bolt provisions
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
• One-piece CHRA and compressor backplate assembly to improve durability
• SFI-approved on specific models

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s GEN2 PT118 CEA® Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 118mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7″ radiused inlet
• H-trim turbine wheel
•Customers can choose an undivided T5 turbine housing in either 1.50 A/R or 2.0 A/R

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT106 Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 106mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7″ radiused inlet
• 110.87mm G-trim turbine wheel
• Turbine housing options:
– T5 Tangential 1.0, 1.32, or 1.50 A/R with 5″ OD (outer diameter) V-band discharge
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PRECISION TURBO & ENGINE has announced the release of their highly-anticipated Mirror Image GEN2 PT7675 turbochargers featuring second generation Competition Engineered Aerodynamics (CEA®) technology.

Designed with the perfectionist in mind, Precision’s Mirror Image Turbochargers will deliver the symmetrical look that enthusiasts have been seeking for years. These units were engineered with a clean sheet approach, to bring your street, race, or show car to a whole new level.

Purpose-built for enhanced durability and maximum performance, the new Mirror Image GEN2 PT7675 turbochargers feature an air-cooled, dual ceramic ball bearing Center Housing Rotating Assembly (CHRA) for faster transient response and the ultimate in thrust capacity. Additional features include a 76mm GEN2 CEA® compressor wheel and a 75mm CEA turbine wheel for maximum power and efficiency. Each turbocharger comes standard with our Ported “H” compressor cover featuring a 4″ inlet and 3″ outlet that is perfect for applications with packaging constraints. All units come standard with a 310-investment cast stainless steel turbine housing to ensure a classy appearance that will last for years.

Rated to support up to 2,600 horsepower in a twin configuration, these products are truly unique in the marketplace and are set to be a game-changer in the performance turbocharger market.

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.

PTE’s PT118 Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 118mm inducer compressor wheel
• Large frame compressor cover with a smooth, 7″ radiused inlet
• 110.87mm G-trim turbine wheel
• Turbine housing options:
– T5 Tangential 1.50 A/R with 5″ OD (outer diameter) V-band discharge
• Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Contact us now on +61296043643 or email us, and remember our best price policy as Australia’s only authorised Precision Turbo dealer.